When the cutting feedrate drops below the set value, Anti-Dive is engaged and the Z-Axis motion is locked. To avoid diving in this situation, the Feedrate Anti-Dive works by setting a feedrate set point. The response from the THC is to lower the torch. When the XY cutting speed slows down, especially when moving at corners, the torch will continue to remove material and cause the tip voltage to rise. The THC from dropping the torch into a cut hole, diving into corners, or diving at the end of a cut. This reading is used to control the torch height motion in a real-time process.ĪrcPro V2 lets the operator easily switch the Plasma cutting parameters based on the material being worked on just by changing the Tool number in mach4.ĪrcPro V2 implements voltage Anti-Dive and feedrate Anti-Dive Protection features. Vital Systems ArcPro V2 Plasma Control offers a high-performace industrial torch height control system.ĪrcPro V2 reads the torch tip voltage through a 0-10V isolated analog input on the motion controller.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |